Kitchen upper cabinet shelf sagging: Reinforcement possible at any hole position using screw-type support pins

A reinforcement method has been revealed for users who have experienced kitchen sink upper cabinet or shoe rack shelves sagging backward, or who feel stuck regarding repairs after losing the shelf support pins they were previously using. According to a video from the YouTube channel 'Jipsuritong', unlike the general method that requires following the existing hole positions, you can reinforce shelves more strongly by using 'screw-type shelf support pins (anti-sleeve kit)' that allow you to drill holes directly at your desired location and fix them.

Fasten at the desired height regardless of existing hole positions

General shelf support pins are a method of inserting them into holes already drilled in the furniture. However, when a shelf sags or support pins are lost, reinforcement is difficult using only the existing hole positions. The video suggests the 'anti-sleeve kit' in a screw-attached form as an alternative. This product is a method where you drill a hole at the desired location using a drill and then fix it by driving in a screw.

The usage method is simple. After making a hole at the location to be fixed with a drill, you simply drive in the screw. At this time, if you use the plastic cap included in the product by covering the screw, you can prevent scratches from occurring on the shelf wood. Especially in cases where the upper cabinet shelf sags backward, if you additionally drive screw-type support pins into the back part of the shelf as well as the sides, you can achieve the effect of stably supporting the shelf so that it does not collapse.

Load precautions and purchase information

A point to be careful of when reinforcing shelves is load management. In the video, rather than trusting the load figures written in the product description 100%, it is advised to use it with the expectation that it can withstand a weight of about 5kg to 10kg, considering that the shelf itself is made of wood, to be safe. This is because the shelf may not be able to endure if excessive weight is forced upon it.

The reinforcement kit in question can be easily obtained online, and the video mentioned that for a cheap price of about 1,600 won, you can obtain a set of around 20 components. This can be useful life information when you want to personally reinforce old shelves in your house at a low cost.